s3cmd --help
usage: s3cmd [options] COMMAND [parameters]
S3cmd is a tool for managing objects in Amazon S3 storage. It allows for
making and removing "buckets" and uploading, downloading and removing
"objects" from these buckets.
options:
-h, --help show this help message and exit
--configure Invoke interactive (re)configuration tool.
-c FILE, --config=FILE
Config file name. Defaults to
/home/valter.silva/.s3cfg
--dump-config Dump current configuration after parsing config files
and command line options and exit.
-n, --dry-run Only show what should be uploaded or downloaded but
don't actually do it. May still perform S3 requests to
get bucket listings and other information though (only
for file transfer commands)
-e, --encrypt Encrypt files before uploading to S3.
--no-encrypt Don't encrypt files.
-f, --force Force overwrite and other dangerous operations.
--continue Continue getting a partially downloaded file (only for
[get] command).
--skip-existing Skip over files that exist at the destination (only
for [get] and [sync] commands).
-r, --recursive Recursive upload, download or removal.
--check-md5 Check MD5 sums when comparing files for [sync].
(default)
--no-check-md5 Do not check MD5 sums when comparing files for [sync].
Only size will be compared. May significantly speed up
transfer but may also miss some changed files.
-P, --acl-public Store objects with ACL allowing read for anyone.
--acl-private Store objects with default ACL allowing access for you
only.
--acl-grant=PERMISSION:EMAIL or USER_CANONICAL_ID
Grant stated permission to a given amazon user.
Permission is one of: read, write, read_acp,
write_acp, full_control, all
--acl-revoke=PERMISSION:USER_CANONICAL_ID
Revoke stated permission for a given amazon user.
Permission is one of: read, write, read_acp, wr
ite_acp, full_control, all
--delete-removed Delete remote objects with no corresponding local file
[sync]
--no-delete-removed Don't delete remote objects.
-p, --preserve Preserve filesystem attributes (mode, ownership,
timestamps). Default for [sync] command.
--no-preserve Don't store FS attributes
--exclude=GLOB Filenames and paths matching GLOB will be excluded
from sync
--exclude-from=FILE Read --exclude GLOBs from FILE
--rexclude=REGEXP Filenames and paths matching REGEXP (regular
expression) will be excluded from sync
--rexclude-from=FILE Read --rexclude REGEXPs from FILE
--include=GLOB Filenames and paths matching GLOB will be included
even if previously excluded by one of
--(r)exclude(-from) patterns
--include-from=FILE Read --include GLOBs from FILE
--rinclude=REGEXP Same as --include but uses REGEXP (regular expression)
instead of GLOB
--rinclude-from=FILE Read --rinclude REGEXPs from FILE
--bucket-location=BUCKET_LOCATION
Datacentre to create bucket in. As of now the
datacenters are: US (default), EU, us-west-1, and ap-
southeast-1
--reduced-redundancy, --rr
Store object with 'Reduced redundancy'. Lower per-GB
price. [put, cp, mv]
--access-logging-target-prefix=LOG_TARGET_PREFIX
Target prefix for access logs (S3 URI) (for [cfmodify]
and [accesslog] commands)
--no-access-logging Disable access logging (for [cfmodify] and [accesslog]
commands)
-m MIME/TYPE, --mime-type=MIME/TYPE
Default MIME-type to be set for objects stored.
-M, --guess-mime-type
Guess MIME-type of files by their extension. Falls
back to default MIME-Type as specified by --mime-type
option
--add-header=NAME:VALUE
Add a given HTTP header to the upload request. Can be
used multiple times. For instance set 'Expires' or
'Cache-Control' headers (or both) using this options
if you like.
--encoding=ENCODING Override autodetected terminal and filesystem encoding
(character set). Autodetected: UTF-8
--verbatim Use the S3 name as given on the command line. No pre-
processing, encoding, etc. Use with caution!
--list-md5 Include MD5 sums in bucket listings (only for 'ls'
command).
-H, --human-readable-sizes
Print sizes in human readable form (eg 1kB instead of
1234).
--progress Display progress meter (default on TTY).
--no-progress Don't display progress meter (default on non-TTY).
--enable Enable given CloudFront distribution (only for
[cfmodify] command)
--disable Enable given CloudFront distribution (only for
[cfmodify] command)
--cf-add-cname=CNAME Add given CNAME to a CloudFront distribution (only for
[cfcreate] and [cfmodify] commands)
--cf-remove-cname=CNAME
Remove given CNAME from a CloudFront distribution
(only for [cfmodify] command)
--cf-comment=COMMENT Set COMMENT for a given CloudFront distribution (only
for [cfcreate] and [cfmodify] commands)
--cf-default-root-object=DEFAULT_ROOT_OBJECT
Set the default root object to return when no object
is specified in the URL. Use a relative path, i.e.
default/index.html instead of /default/index.html or
s3://bucket/default/index.html (only for [cfcreate]
and [cfmodify] commands)
-v, --verbose Enable verbose output.
-d, --debug Enable debug output.
--version Show s3cmd version (1.0.0) and exit.
-F, --follow-symlinks
Follow symbolic links as if they are regular files
Commands:
Make bucket
s3cmd mb s3://BUCKET
Delete bucket
s3cmd rb s3://BUCKET
List objects or buckets
s3cmd ls [s3://BUCKET[/PREFIX]]
List all object in all buckets
s3cmd la
Put file into bucket
s3cmd put FILE [FILE...] s3://BUCKET[/PREFIX]
Get file from bucket
s3cmd get s3://BUCKET/OBJECT LOCAL_FILE
Delete file from bucket
s3cmd del s3://BUCKET/OBJECT
Delete file from bucket (alias for del)
s3cmd rm s3://BUCKET/OBJECT
Restore file from Glacier storage
s3cmd restore s3://BUCKET/OBJECT
Synchronize a directory tree to S3 (checks files freshness using
size and md5 checksum, unless overridden by options, see below)
s3cmd sync LOCAL_DIR s3://BUCKET[/PREFIX] or s3://BUCKET[/PREFIX] LOCAL_DIR
Disk usage by buckets
s3cmd du [s3://BUCKET[/PREFIX]]
Get various information about Buckets or Files
s3cmd info s3://BUCKET[/OBJECT]
Copy object
s3cmd cp s3://BUCKET1/OBJECT1 s3://BUCKET2[/OBJECT2]
Modify object metadata
s3cmd modify s3://BUCKET1/OBJECT
Move object
s3cmd mv s3://BUCKET1/OBJECT1 s3://BUCKET2[/OBJECT2]
Modify Access control list for Bucket or Files
s3cmd setacl s3://BUCKET[/OBJECT]
Modify Bucket Policy
s3cmd setpolicy FILE s3://BUCKET
Delete Bucket Policy
s3cmd delpolicy s3://BUCKET
Modify Bucket CORS
s3cmd setcors FILE s3://BUCKET
Delete Bucket CORS
s3cmd delcors s3://BUCKET
Modify Bucket Requester Pays policy
s3cmd payer s3://BUCKET
Show multipart uploads
s3cmd multipart s3://BUCKET [Id]
Abort a multipart upload
s3cmd abortmp s3://BUCKET/OBJECT Id
List parts of a multipart upload
s3cmd listmp s3://BUCKET/OBJECT Id
Enable/disable bucket access logging
s3cmd accesslog s3://BUCKET
Sign arbitrary string using the secret key
s3cmd sign STRING-TO-SIGN
Sign an S3 URL to provide limited public access with expiry
s3cmd signurl s3://BUCKET/OBJECT <expiry_epoch|+expiry_offset>
Fix invalid file names in a bucket
s3cmd fixbucket s3://BUCKET[/PREFIX]
Create Website from bucket
s3cmd ws-create s3://BUCKET
Delete Website
s3cmd ws-delete s3://BUCKET
Info about Website
s3cmd ws-info s3://BUCKET
Set or delete expiration rule for the bucket
s3cmd expire s3://BUCKET
Upload a lifecycle policy for the bucket
s3cmd setlifecycle FILE s3://BUCKET
Get a lifecycle policy for the bucket
s3cmd getlifecycle s3://BUCKET
Remove a lifecycle policy for the bucket
s3cmd dellifecycle s3://BUCKET
List CloudFront distribution points
s3cmd cflist
Display CloudFront distribution point parameters
s3cmd cfinfo [cf://DIST_ID]
Create CloudFront distribution point
s3cmd cfcreate s3://BUCKET
Delete CloudFront distribution point
s3cmd cfdelete cf://DIST_ID
Change CloudFront distribution point parameters
s3cmd cfmodify cf://DIST_ID
Display CloudFront invalidation request(s) status
s3cmd cfinvalinfo cf://DIST_ID[/INVAL_ID]
For more information, updates and news, visit the s3cmd website:
http://s3tools.org